Options

INTEGRALdx offers a dynamic range of options to go with your concrete redi-mix truck!

Mixer Controls

An in-cab shot of INTEGRALdx's RESULTS controls, showing off the 11 button screen and the 12 button arm rest with a joystick

In-Cab RESULTS Controls

Our 7 inch display features realtime slump readings, booster pressure, oil temperature, drum RPMs, and integrated backup camera.

A rear pendant controller for an INTEGRALdx concrete redi-mix truck. The yellow, cable-attached pendant has a total of 12 buttons. In this image, it is being held in someone's hand.

Rear RESULTS Pendant

Control your EASI REDI-Mix Truck from the rear with our RESULTS-compatible pendant.

The in-cab cable controls of an INTEGRALdx concrete redi-mix truck. This particular model features a red lever. There is also a drum counter and a temperature light (green means normal; red means high). Furthermore, the control box has toggle switches for the following features: starting or stopping the drum, charging the drum, lifting up the chute, locking the chute, activating or deactivating the hopper, and toggling the work light on or off.

In-Cab Cable Controls

Control your EASI REDI-Mix Truck with a more traditional yet reliable set of controls.

A view of an INTEGRALdx concrete redi-mix truck's rear cable controls, featuring a red and gray lever and four toggle switches for locking the chute, starting or stopping the drum, throttling, and moving the chute up or down.

Rear Cable Controls

Our cable controls come with a traditional rear control box.

Body Options

A concrete redi-mix truck with a white and orange color scheme built for Carr Bros.

Custom Paint

On request, we’ll paint your EASI REDI-Mix Truck to fit your brand!
A close up view of the ZF CML 12 gearbox equipped on an INTEGRALdx concrete redi-mix truck.

ZF CML 12

Need a smaller, lighter gearbox for your drum? Pick a ZF CML 12.
A close up view of the ZF P7300 gearbox equipped on an INTEGRALdx concrete redi-mix truck.

ZF P7300

Want industry-proven performance? Pick a ZF P7300.
A chassis canvas cover on the bed of an INTEGRALdx concrete redi-mix truck, viewed at an angle from the left side.

Canvas

Put a canvas cover between your drum and canvas.

Safety Features

A side view of the man saver device atop the concrete redi-mix truck's ladder platform.

Man Saver

Help prevent falls by adding a safety bar to the top of your EASI REDI-Mix Truck’s ladder.

A close up of INTEGRALdx's hydraulic foldover chute, compatible with its line of concrete redi-mix trucks.

Hydraulic Foldover

Open and fold over your main chute safely using control-operated hydraulics.

The side view of a finger saver on the chute of an INTEGRALdx concrete redi-mix truck.

Finger Saver

Avoid crunching fingers while folding over a chute with our manual finger saver.

A view of an INTEGRALdx concrete redi-mix truck's street guard, which covers the chute when not in use to prevent accidental discharge from reaching the street.

Street Guard

Avoid accidental spills while traveling with a special lid for your main chute.

A view of an INTEGRALdx concrete redi-mix truck's orange front roller guard, meant to prevent appendages from getting caught in the drum rollers.

Roller Guards

All of our EASI REDI-Mix Trucks come equipped with two covers to keep hands away from the drum rollers.

An INTEGRALdx concrete redi-mix truck equipped with rear bumper steps

Bumper Steps

Request bumper steps to reach your chute more safely.

A grab handle on the back left side of an INTEGRALdx concrete redi-mix truck, just ahead of a deadman valve and rear controls.

Grab Handles

Pair grab handles with bumper steps for extra stability.

A closeup of a black protected backup camera on an INTEGRALdx concrete redi-mix truck, with a protective white cover over it.

Protected Backup Camera

Back up safer with our protected backup camera, standard with smart controls.

Mud flaps on the booster axle wheels of an INTEGRALdx concrete redi-mix truck.

Booster Mud Flaps

Reduce the risk of damage or injury with mud flaps on your booster axle.

Water Management

A dual water tank setup found between the cabin and drum of an INTEGRALdx concrete redi-mix truck.

Dual Water Tanks

Increase your water capacity by utilizing both crossmount and sidemount tanks.

A yellow deadman valve located at the rear of an INTEGRALdx concrete redi-mix truck

Deadman Valve

Add a deadman valve to cut off the flow of water as soon as you let go.

The standard valve located at the rear of an INTEGRALdx concrete redi-mix truck

Standard Valve

Our standard valve gives you manual control over water flow.

A pneumatic water pump, situated on the side of an INTEGRALdx concrete redi-mix truck

Pneumatic Water Pump

Upgrade to a pneumatic water pump to increase your maximum flow rate for demanding applications.

A reclaimer found on the right rear of an INTEGRALdx concrete redi-mix truck

Pneumatic Reclaimer

Protect the environment from concrete waste with a pneumatic reclaimer!

INTEGRALdx offers two positions for slump gauge placement on their concrete redi-mix trucks: near the gearbox or below the rear roller guard as pictured in this photo.

Slump Gauges

Choose to have one or more gauges to measure your slump.

A wash out system for the EASI REDI-Mix Truck, located at the intake hopper, with controls along the back left side.

RESULTS Wash Out System

Clean out the drum, charge hopper, discharge hopper, and chutes with an automated or manual wash out system.

Spray Bar

Clean your drum whenever you need to by adding a spray bar on the side of your EASI Drum.

Chute Options

A close up view of INTEGRALdx's 24 inch chute extension.

24" Extension Chute

Extend your concrete chute by another 24 inches.

Three chutes mounted horizontally along the side of an EASI REDI-Mix Truck with an aluminum mount

Aluminum Side Mount

Our aluminum chute can hold up to three chutes on the side of your mixer.

Three chutes mounted vertically on the right rear of an INTEGRALdx concrete redi-mix truck with a steel mount.

Steel Shotgun Mount

Our steel mount can hold up to three chutes at the rear of your mixer.

A yellow GT13 chute vibrator attached to the underside of an INTEGRALdx concrete redi-mix truck chute.

Chute Vibrator

Optimize your clean out process with GT13 chute vibrators controlled via ball valves.

Storage

A clean hose and harness basket on an INTEGRALdx concrete redi-mix truck.

Hose & Harness Basket

Standard on all builds, we organize all hoses and harnessing to run the frame in a wire basket.

A tool organizer found on the left side of an INTEGRALdx concrete redi-mix truck.

Tool Organizer

Organize your tools with ease along the side of your truck.

The front view of a 24 by 18 by 18 poly toolbox, featuring a shiny metallic latch

Poly Toolbox

Store your tools in a simple 24 x 24 x 18 poly box.

The front view of a 24 by 24 by 24 aluminum toolbox, surrounded in perforated aluminum.

Aluminum Toolbox

Need more space for tools? Upgrade from a poly toolbox to an aluminum toolbox.

A 24 by 18 by 28 step toolbox equipped on the side of an INTEGRALdx concrete redi-mix truck.

Step Toolbox

Add storage space with a step tool box for applications utilizing a cross mount water tank.

An EASI REDI-Mix Conventional Truck using a Western Star chassis.

Contact Us

This website uses cookies

We use cookies to personalize content, provide social media features, and analyze our traffic. We also share information about your use of our site with our analytics partners. You can change your preferences at any time. For more information, please see our privacy policy. Privacy Policy